Skip to main content

A Take A Look Of What's Inside The Google Pixel 10, Camera, Battery, Display, and Main Board Assembly

By
Let's take a look the whole assembly inside the Google Pixel 10 as IFixit once again showed us the step by step teardown guide. You'll be surprised of how the layout of the main board, battery and camera being neatly stack. It begins with dismounting the battery assembly, down to the camera, then the main board, down to the screen display. Disassembling the Google Pixel 10 only need an anti-clamp a few picks, and a screw driver, making any future repair effortless. . Why do we need a teardown guide? We'll here's how IFixit answers: The Pixel 10 is powered by Google’s smartest chip yet, it’s packed with AI that can translate calls in real time, coach your photography, and even write emails for you. But here’s the thing: no AI feature in the world is going to help when your battery dies. That’s where we come in, so let’s open it up and see how repair-friendly this “AI-first” phone really is. Chapters 00:00 Intro to the Pixel 10 Teardown 00:20 Heatless back panel re...
Post a Comment

Root Galaxy Tab 2 7" GT-P3113 4.1.1 Jelly Bean P3113UECLK7 Complete Stock Image

By
If you want to root your Samsung Galaxy Tab 2 GT-P3113 Wi-Fi  that has just updated to the latest Android 4.1.1 Jelly Bean update with baseband build version "P3113UECLK7", then this root method will definitely best suites to your liking. An XDA-Developer Recognized Contributor -  mrRobinson has created this root stock image. This is a well-known man not just in U.S and Canada but throughout the world for his great job on Android devices safest rooting techniques from Galaxy S3, Galaxy Note /2 etc.
This is nothing more than a pre-rooted completely stock image that you would flash in Odin.
It is based off of this stock image: P3113UECLK7_P3113XACCLK7_HOME.tar.md5
Simply adds the SuperSU apk v0.99 and su binary.
From there you can chose to install busybox, flash a non-stock recovery, etc.
It DOES NOT wipe any data. So if you are coming from a completely different rom base then you will want to boot to recovery and factory reset.
This is good for getting back to known good state after you may have flashed something and now have weird behavior going on. Also good if you want to run stock but just have root for a few apps like adaway or tibu.

Here's the guide on how to Root the Galaxy Tab 2 7"  GT-P3113 runs with 4.1.1 Jelly Bean P3113UECLK7 Stock Firmware

  • Grab Odin3_v3.07 link for Galaxy Tab 2 P3113
  • Install the Galaxy Tab 2 USB Driver link.
  • Make sure the battery is fully charge. 
  • Enable USB debugging mode of your Tab 2 Goto Settings>Application>Development>Turn On USB debugging mode.
  • Grab the pre-rooted stock image P3113UECLK7 from XDA original thread. http://forum.xda-developers.com/showthread.php?t=2099779

1. Extract the downloaded root66_XAC_P3113UECLK7.7z in separate folder on your computer.
2. Run Odin Odin3_v3.07.exe
3. Click on the PDA button then browse the root66_XAC_P3113UECLK7.tar.md5, select to load it.
4. In Odin checkboxes options,  make sure that you DO NOT TICK the "Re-Partition box. Just leave the Auto-Reboot and F-Reset Time checked.
5. Put your Galaxy Tab 2 7 into ODIN download mode by holding down both "Power Button and Volume Down button" then let go when your Galaxy Tab 2 reboots. Then press Volume Up button to continue and your Tab 2 should be in ODIN download mode.
6. Connect the Galaxy Tab 2 to computer.
7.  Now simply hit the "START" button.
8. Wait until it completely flashes the root stock image.
9. Once finish and the Galaxy Tab 2 reboots, disconnect the tab from computer
10. Done!

Optional: Perform 'factory reset' to get rid of bootloops issues. This will also fix re-boot problem.

In addition, you do not need to worry about your Galaxy Tab receiving any upcoming updates - 4.1.2, that's because your device still runs in P3113UECLK7 Jelly Bean firmware. If you need to removed root for future use, then you can also easily revert back to 100% stock. Just grab the original stock rom for your Galaxy Tab 2 GT-P3113 below and simply flash it as the same method above.

U.S Galaxy Tab 2 GT-P3113 Stock ROM -  P3113UECLK7_P3113XARCLK7_XAR.zip here
Canada Galaxy Tab 2 GT-P3113 Stock ROM -  P3113UECLK7_P3113XACCLK7_XAC.zip here

Enjoy rooting your Galaxy Tab 2!

Labels:

Comments

  1. Unknown9:05:00 AM

    I tried this way out, with the included links, to root my Tab. With the root image, it seems to stick at a point where the progress bar is in front of the Android image with the spinny thing, with the progress bar right in front of his right leg.

    ReplyDelete
    Replies
    1. ric4:37:00 AM

      did this get worked out for you

      Delete
  2. ric4:17:00 AM

    how long did it take to finish

    ReplyDelete
  3. Unknown12:13:00 AM

    same prob ill see how long it takes to finish

    ReplyDelete
  4. Unknown7:53:00 AM

    Success thank you!

    ReplyDelete
  5. Unknown4:08:00 PM

    same problem

    ReplyDelete
  6. Unknown10:17:00 AM

    i did not see "com" in my odin when i run, is this normal?
    it just says the following after i click the start button:

    root66_XAC_P3113UECLK7.tar.md5 is valid.
    Checking MD5 finished Sucessfully..
    Leave CS..
    Removed!!
    All threads completed. (succeed 0 / failed 0)
    All threads completed. (succeed 0 / failed 0)

    and my gt-p3113 screen shows Downloading...Do not turn off target!!

    how long do i need to wait? is this normal?

    please advise and thanks.

    ReplyDelete
  7. Neil Ocean9:17:00 PM

    Did you install the USB driver? The flashing wasn't succeeded because the device wasn't recognized with Odin.

    Try to install latest Kies for the necessary USB driver.
    http://www.samsung.com/uk/support/model/GT-P3100TSABTU-downloads

    ReplyDelete
  8. Unknown2:13:00 PM

    Having the same problem as everyone else and its been over an hour stuck at the same point, starting to worry if the battery will die before its done. Any ideas on why its taking so long or does anyone know how long it takes...

    ReplyDelete
  9. Unknown4:42:00 AM

    how long does the reboot take

    ReplyDelete

Post a Comment

Popular posts from this blog

Comparison of the Samsung Galaxy Watch 8 and Google Pixel Watch 4

By
Comparison of the Samsung Galaxy Watch 8 and Google Pixel Watch 4 Both the Samsung Galaxy Watch 8 and Google Pixel 4 are top-tier Android smartwatches running Wear OS 6 with Google's Gemini AI. They offer similar core functions, such as call handling, contactless payments, and comprehensive health and fitness tracking, with a maximum brightness of 3,000 nits on their displays. The best choice depends on the preferred design, battery life needs, and commitment to a specific phone ecosystem.  Design and Display Feature Google Pixel Watch 4 Samsung Galaxy Watch 8 Features a classic round face with a domed AMOLED screen for a more immersive feel and smaller bezels.   Thicker at 12.3mm, with case sizes of 41mm and 45mm.   Uses Corning Gorilla Glass 5.   Offers more case and band color choices. Adopted a "squircle" or cushion-shaped bezel and case, with a circular Super AMOLED screen.  Thinner and lig...
Post a Comment
Read more

Samsung Updates its Flagship and Mid-Range Phones with the One UI 8 Beta

By
We've all been anticipating the release of the stable version of Samsung's One UI 8 beta program, which is based on Android 16. Although that hasn't happened yet, the firm released the sixth beta build of the Galaxy S25 family today in Germany, the UK, India, and Korea.  In contrast to the fifth beta, which was made available around a week ago and concluded in "ZYH6," the build number finishes in "ZYHB." The September 2025 security patch level is included in the latest beta, possibly giving away when Samsung intends to release the stable version of this upgrade. Upgrading a Samsung Galaxy S25 Ultra to One UI 8   What you must understand   In India, South Korea, and the UK, Samsung starts distributing the One UI 8 beta for the Galaxy S23 series. Prior to the Z Fold 5 and Z Flip 5 models, the mid-range Galaxy A55, A54, A36, and A35 devices also receive the One UI 8 beta. Redesigned Samsung apps, Now Bar apps, and 90:10 split-screen are all feature...
Post a Comment
Read more

2018 March Galaxy Note 5 Updates With Mobile Hotspot APN Fixes

By
Yet another round of updates has been making its rounds on Samsung Galaxy Note 5 recently.  These updates includes the monthly Google security fix, while other variants also received various system improvements, just like AT&T's Galaxy Note 5 that have had gotten its  Mobile hotspot APN fix alongside with the Android device security updates. This just to let you know that the Galaxy Note 5 is still rocking these days even though it has already gotten its long time successors, the Galaxy Galaxy Note 8, and then the upcoming Galaxy Note 9. Anyways, here are the recent updates of each  specific Galaxy Note 5 variants across the world. Just take a look at your device model numbers and make ensure that it has been updated from time to time. AT&T Galaxy Note 5 Update (SM-N920A) Device name:  Galaxy Note5 Model number: SM-N920A Android version: 7.0 (Nougat) Android security patch level: March 1, 2018 Baseband version: N920AUCU5...
Post a Comment
Read more