Some smartphones featuring the Snapdragon 8 Elite Gen 5 have already been launched in China, with many expecting a global release shortly after. A growing list of flagship smartphones are expected to feature the Snapdragon 8 Elite Gen 5 processor, which was officially announced in late September 2025. The chipset is anticipated to power top-tier Android devices throughout late 2025 and 2026, with several phones already confirmed or heavily rumored. Xiaomi 17 series: The Xiaomi 17, Xiaomi 17 Pro, and Xiaomi 17 Pro Max were confirmed as the first phones to use this chip. The Pro and Pro Max models will include a secondary rear display. nubia REDMAGIC 11 Pro series: The gaming-focused nubia REDMAGIC 11 Pro series is set to feature the Snapdragon 8 Elite Gen 5. realme GT8 Pro: The realme GT8 Pro launched in China in October 2025 with the new Snapdragon chip and is expected to be released in international markets later. Honor Magic 8 series: The Honor Magic 8 series, which includes t...
Latest CyonogenMod 10.1-M2 nightly build is now also made available for Samsung Galaxy Tab 2 10.1 P5100, P5110 and P5113, this also includes the Samsung Galaxy Tab 2 7.0 and several different android devices like the Samsung Galaxy S3, Galaxy Note, HTC EVO 4G, Nexus, LG Optimus and more. This update is part of CyanogenMod latest "M" build series released as of March 05, 2013. . The CM10.1-m2 is based on Android 4.2.2 AOSP. Those who already runs the CM10.1 ROM for a long time now, you can update your devices to this latest released. The M builds targets to be more stabler released, CyanogenMod team also encourage users to report any bugs and other issues.
p5100: http://www.get.cm/?device=p5100
p5110: http://www.get.cm/?device=p5110
p5113: http://www.get.cm/?device=p5113
Google Apps or GApps:
http://goo.im/gapps
Clockworkmod recovery:
ClockworkMod-Recovery
Disclaimer: Installing custom ROM will void the warranty of your device. The ROM and Custom Recovery developer and including us shall not be held responsible if any damage happens to your device. Using of the files is solely at your own risk. These files are developed and owned by each respective copyright holders. You may proceed at your own risk!
- Copy GApps and CM10.1 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM10.1 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM10.1 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM10.1 zip from internal SDCard
- Reboot
Upgrading from CyanogenMod 10:
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
Before you can actually install or flash the CyanogenMod 10.1-M2 on the Galaxy Tab 2,you may first install the ClockworkMod recovery unto your device. Here's how,
1. Grab the ClockworkMod recovery from above link.
2. Download Odin v3.04 (unzip it after download) and install the USB driver.
3. Run and configure Odin on your computer. Make sure that the "Re-Partition" and "Auto Reboot" option are not checked, only "F. Reset Time" option is ticked.
4. Reboot the Galaxy Tab 2 in Download mode:
Turn it off , then Press and hold the Volume Up and Power buttons simultaneously.
You then need to press the volume down to confirm and continue to enter into Download Mode.
5. Once the Tablet is in download mode., Connect it to the to computer using the USB Cable.
The ID:COM port at Odin turns in bluish and it says “Added!!” inside its text-log.
Now click on PDA button and then select CWMrecovery.tar file.
6. Simply tick the "START" button to begin installing the ClockWorkMod recovery.
7. Wait until it finishes flashing. You will then just prompted with a "PASS!" message
8. Unplugged the device from computer and then reboot.
Step 2: Now, proceed installing the CyanogenMod 10.1-M2 via ClockworkModrecovery.
1. Copy gapps-jb-20130301-signed.zip and i.e cm-10.1-20130305-NIGHTLY-p5110.zip (GT-P5510) to your internal SDCard.
2. Restart the Galaxy Tab 2 10.1 in Recovery Mode (Hold Volume + & Power Button), this should get you into CWM
(If you see Stock Recovery, you messed up, start again)
3. Once in CWM recovery, navigate down using the volume button and then select "Install Zip from SDCard"
4. Find the cm-10.1-20130305-NIGHTLY-p5110.zip file and install it using the power button. Wait until it finishes.
5. Now repeat the process for the Gapps, this time select the gapps-jb-20130301-signed.zip
6. Select "Go Back+++" and then "Reboot Device"
That's all folks, you can now enjoy the CyanogenMod 10.1-M2 on your Samsung Galaxy Tab 2 10-inch P5100, P5110 and P5113.
Source: Cyanogenmod.org

CyanogenMod 10.1-M2 based Android 4.2.2 Downloads:
CM10.1 official nightly builds:p5100: http://www.get.cm/?device=p5100
p5110: http://www.get.cm/?device=p5110
p5113: http://www.get.cm/?device=p5113
Google Apps or GApps:
http://goo.im/gapps
Clockworkmod recovery:
ClockworkMod-Recovery
Disclaimer: Installing custom ROM will void the warranty of your device. The ROM and Custom Recovery developer and including us shall not be held responsible if any damage happens to your device. Using of the files is solely at your own risk. These files are developed and owned by each respective copyright holders. You may proceed at your own risk!
Quick Guide for advance users:
- Install the official Clockworkmod recovery- Copy GApps and CM10.1 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM10.1 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM10.1 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM10.1 zip from internal SDCard
- Reboot
Upgrading from CyanogenMod 10:
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
Guides for completely Noobs:
Step 1: Install CWM recovery on Samsung Galaxy Tab 2 7" P3100, P3110, P3113Before you can actually install or flash the CyanogenMod 10.1-M2 on the Galaxy Tab 2,you may first install the ClockworkMod recovery unto your device. Here's how,
1. Grab the ClockworkMod recovery from above link.
2. Download Odin v3.04 (unzip it after download) and install the USB driver.
3. Run and configure Odin on your computer. Make sure that the "Re-Partition" and "Auto Reboot" option are not checked, only "F. Reset Time" option is ticked.
4. Reboot the Galaxy Tab 2 in Download mode:
Turn it off , then Press and hold the Volume Up and Power buttons simultaneously.
You then need to press the volume down to confirm and continue to enter into Download Mode.
5. Once the Tablet is in download mode., Connect it to the to computer using the USB Cable.
The ID:COM port at Odin turns in bluish and it says “Added!!” inside its text-log.
Now click on PDA button and then select CWMrecovery.tar file.
6. Simply tick the "START" button to begin installing the ClockWorkMod recovery.
7. Wait until it finishes flashing. You will then just prompted with a "PASS!" message
8. Unplugged the device from computer and then reboot.
Step 2: Now, proceed installing the CyanogenMod 10.1-M2 via ClockworkModrecovery.
1. Copy gapps-jb-20130301-signed.zip and i.e cm-10.1-20130305-NIGHTLY-p5110.zip (GT-P5510) to your internal SDCard.
2. Restart the Galaxy Tab 2 10.1 in Recovery Mode (Hold Volume + & Power Button), this should get you into CWM
(If you see Stock Recovery, you messed up, start again)
3. Once in CWM recovery, navigate down using the volume button and then select "Install Zip from SDCard"
4. Find the cm-10.1-20130305-NIGHTLY-p5110.zip file and install it using the power button. Wait until it finishes.
5. Now repeat the process for the Gapps, this time select the gapps-jb-20130301-signed.zip
6. Select "Go Back+++" and then "Reboot Device"
That's all folks, you can now enjoy the CyanogenMod 10.1-M2 on your Samsung Galaxy Tab 2 10-inch P5100, P5110 and P5113.
Source: Cyanogenmod.org
Thank you. Thank you. Thank you. I had bricked my Tab and spent 6 hours trying to recover it. Your steps worked wonderfully. The keyboard is giving me some issues but that is minor compared to it not booting. :D
ReplyDelete