Let's take a look the whole assembly inside the Google Pixel 10 as IFixit once again showed us the step by step teardown guide. You'll be surprised of how the layout of the main board, battery and camera being neatly stack. It begins with dismounting the battery assembly, down to the camera, then the main board, down to the screen display. Disassembling the Google Pixel 10 only need an anti-clamp a few picks, and a screw driver, making any future repair effortless. . Why do we need a teardown guide? We'll here's how IFixit answers: The Pixel 10 is powered by Google’s smartest chip yet, it’s packed with AI that can translate calls in real time, coach your photography, and even write emails for you. But here’s the thing: no AI feature in the world is going to help when your battery dies. That’s where we come in, so let’s open it up and see how repair-friendly this “AI-first” phone really is. Chapters 00:00 Intro to the Pixel 10 Teardown 00:20 Heatless back panel re...
If it happens that you've already lose root after the Android 4.4.4 update dubbed with firmware build G900VVRU1ANI2 on your Galaxy S5 SM-G900V Verizon version. You can still gain root on G900VVRU1ANI2 4.4.4 update using the same method that we have been proven worked on previous 4.4.2 update build G900VVRU1ANE9. The root process only requires some workaround by tweaking the stock kernel and then by installing Towelroot and the latest SuperSU into your phone.
In addition, this root method requires you to revert back to G900VVRU1ANCG kernel version as *Geohot’s Towelroot* only covered and only worked on an older firmware build that did not exceed the June 3rd 2014 time limit. Once the G900VVRU1ANCG kernel installation has made you can then run Towelroot then simply flash back the new G900VVRU1ANI2 4.4.4 kernel build.
If you have nay doubt if this root method truly worked, our fellas at XDA-developers can confirm about that and it did actually worked on the latest G900VVRU1ANI2 4.4.4 KitKat update.
1.) Take the OTA to G900VVRU1ANI2 4.4.4 .
2.) Once your phones starts put it back into download mode, and select G900V_NCG_Stock_Kernel.tar.md5 under PA and Click start and wait a few minutes.
3.) Once your phone restarts you may notice some apps will start to fail and force close, this is why I had you install Towel Root prior so we can get in and get out, Press Ok or Force Close continuously if necessary until you get Towel Root open and "Make it rain". Then turn off the phone and go back into Download Mode.
4.) Now flash NI2_stock_kernel.tar.md5 and let the phone restart
5.) Update the SuperSu binary from Play Store if necessary.
Just head-over at XDA-developers original thread for the step-by-step instructions.
Make sure to give thank’s to [JTidler] and to all of our XDA-Developers fellas for providing the necessary files and those who have risk their devices into some possible undesired outcomes. Just drop some few words below if this root method has just worked out on your Samsung Galaxy S5 SM-G900V, so others may also knows about it.
In addition, this root method requires you to revert back to G900VVRU1ANCG kernel version as *Geohot’s Towelroot* only covered and only worked on an older firmware build that did not exceed the June 3rd 2014 time limit. Once the G900VVRU1ANCG kernel installation has made you can then run Towelroot then simply flash back the new G900VVRU1ANI2 4.4.4 kernel build.
If you have nay doubt if this root method truly worked, our fellas at XDA-developers can confirm about that and it did actually worked on the latest G900VVRU1ANI2 4.4.4 KitKat update.
Good Work
Just finished everything went smooth still have root
4.4.4 build an12 thanks
Super easy guide to follow. Thanks OP
Worked like a charm on my Verizon SM-G900V that had taken the N12 OTA update.
The Root Process
1.) Take the OTA to G900VVRU1ANI2 4.4.4 .
2.) Once your phones starts put it back into download mode, and select G900V_NCG_Stock_Kernel.tar.md5 under PA and Click start and wait a few minutes.
3.) Once your phone restarts you may notice some apps will start to fail and force close, this is why I had you install Towel Root prior so we can get in and get out, Press Ok or Force Close continuously if necessary until you get Towel Root open and "Make it rain". Then turn off the phone and go back into Download Mode.
4.) Now flash NI2_stock_kernel.tar.md5 and let the phone restart
5.) Update the SuperSu binary from Play Store if necessary.
Just head-over at XDA-developers original thread for the step-by-step instructions.
Make sure to give thank’s to [JTidler] and to all of our XDA-Developers fellas for providing the necessary files and those who have risk their devices into some possible undesired outcomes. Just drop some few words below if this root method has just worked out on your Samsung Galaxy S5 SM-G900V, so others may also knows about it.
What about if I just purchased a (new) Verizon Galaxy S5 that still has 4.4.2 G900VVRU1ANCG on it out of the box?
ReplyDeleteJust directly run Towelroot app in it.. then disable OTA if you want to keep it in 4.4.2 NCG..
ReplyDelete