The speculation has been widespread. Some suggest that the Exynos 2600 application processor (AP), produced by Samsung Foundry using its 2nm GAA technology, will be the driving force behind the majority of the Samsung Galaxy S26 models, including the Galaxy S26 Ultra in certain regions. Previously, Samsung Foundry encountered challenges with the yield of its 3nm production, resulting in a shortage of Exynos 2500 APs for the Galaxy S25 series. The standard Samsung Galaxy S25, S25+, and S25 Ultra models are all equipped with the Snapdragon 8 Elite for Galaxy processor. This marks a shift from previous models, such as the Galaxy S24 series, which used both Snapdragon and Samsung's own Exynos chipsets, depending on the region. While during Qualcomm's recent earnings call following the release of its fiscal Q4 earnings, the company said that it expected its new Snapdragon chip to be found in 75 percent of the Galaxy S26 handsets. Qualcomm said that it used to expect to get 50 pe...
Telus, Bell, and Rogers Galaxy Note 5 receives Voice over LTE and October Android security patch updates to N920W8VLU4BPJ1
Canada's Samsung Galaxy Note 5 has gotten the new Android security patch update. The new OTA update has bumped up the device Android 6.0.1 Marshmallow to build version N920W8VLU4BPJ1 from previous version N920W8VLS3BPF1. Along with the update is an improvements to the Voice over LTE (VoLTE) and also equipped with October Android security patches updates that addresses the Android vulnerabilities.
This update is now rolling out to Telus, Bell, Rogers, including the factory unlocked and among the rest of Canadian carrier's Samsung Galaxy Note 5.
What's New:
Technical details:
This update weighs at approximately 277 MB in file size to download via Over-The-Air. It is also being held available via Samsung Smart Switch for PC. This update is released to Telus, Bell, Rogers, Koodo, Fido, Wind Videotron, Sasktel, Eastlink, Virgin-mobile, including the factory unlocked version of the Galaxy Note5 SM-N920W8.
The Over The Air (OTA) update might require you to connect your Galaxy Note 5 to a Wi-Fi network to get rid of high data charges.
Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.
This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to back up and restore your data in just a few clicks away.
Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.
This update is now rolling out to Telus, Bell, Rogers, including the factory unlocked and among the rest of Canadian carrier's Samsung Galaxy Note 5.
What's New:
- Improved Voice over LTE
- Google Security update
Technical details:
- Android version: 6.0.1
- Security patch level: October 1, 2016
- Baseband version: N920W8VLU4BPJ1
- Kernel version: 3.10.61-9393136
- Build number: MMB29K. N920W8VLU4BPJ1
This update weighs at approximately 277 MB in file size to download via Over-The-Air. It is also being held available via Samsung Smart Switch for PC. This update is released to Telus, Bell, Rogers, Koodo, Fido, Wind Videotron, Sasktel, Eastlink, Virgin-mobile, including the factory unlocked version of the Galaxy Note5 SM-N920W8.
How to Update the Galaxy Note 5 via Over-The-Air (OTA)
The Over The Air (OTA) update might require you to connect your Galaxy Note 5 to a Wi-Fi network to get rid of high data charges.
- From the device Home screen, simply tap Apps.
- Tap the Settings (gear icon).
- Tap the System tab.
- Tap About device.
- Tap Software update.
- Tap Check for updates.
- Tap the Install button, then OK.
Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.
Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch
This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to back up and restore your data in just a few clicks away.
- Download Smart Switch for PC and MAC computers version and then install it on your computer.
- Connect your Galaxy Note 5 on your computer using the USB cable.
- Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.
- Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.
Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.
Comments
Post a Comment