The speculation has been widespread. Some suggest that the Exynos 2600 application processor (AP), produced by Samsung Foundry using its 2nm GAA technology, will be the driving force behind the majority of the Samsung Galaxy S26 models, including the Galaxy S26 Ultra in certain regions. Previously, Samsung Foundry encountered challenges with the yield of its 3nm production, resulting in a shortage of Exynos 2500 APs for the Galaxy S25 series. The standard Samsung Galaxy S25, S25+, and S25 Ultra models are all equipped with the Snapdragon 8 Elite for Galaxy processor. This marks a shift from previous models, such as the Galaxy S24 series, which used both Snapdragon and Samsung's own Exynos chipsets, depending on the region. While during Qualcomm's recent earnings call following the release of its fiscal Q4 earnings, the company said that it expected its new Snapdragon chip to be found in 75 percent of the Galaxy S26 handsets. Qualcomm said that it used to expect to get 50 pe...
An update to build version G920FXXU2POH8 for Galaxy S6 (SM-G920F) and G925FXXU2POH8 for the Galaxy S6 edge (SM-G925F) is about to reach its destination to Switzerland. Both updates build are an unbranded version and still in Android 5.1.1 Lollipop base. While looking at the firmware build details itself, it seems that tweaks contained inside in it is something quite similar to the ones released in England and France recently that being dubbed with build G920FXXU2COH2 and build G925FXXU2COH2. The update might also have the icons being changed with a rounded corner design just like the ones found on Galaxy S6 edge+ and the Galaxy Note 5.
So anyway, if it happens that you're from Switzerland and owns the unlocked Galaxy S6 and or the Galaxy S6 edge (SM-G925F), much better check the update right now. Below are the technical details of each update.
Model number: SM-G920F
Android version: 5.1.1
Baseband version: G920FXXU2POGQ
Kernel version: 3.10.61-5447113
Build number: LMY47X.G920FXXU2POH8
AP: G920FXXU2POH8
CP: G920FXXU2POGQ
CSC: G920FAUV2POG3
Model number: SM-G925F
Android version: 5.1.1
Baseband version: G925FXXU2POGQ
Kernel version: 3.10.61-5447113
Build number: LMY47X.G925FXXU2POH8
AP: G925FXXU2POH8
CP: G925FXXU2POGQ
CSC: G925FAUV2POG3
Here’s how to do it manually:
It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Download and Install now if you do so or else Install later if you want to get the update in later time.
Download Smart Switch for PC
You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac. Once you installed Smart Switch, all you need is a connection between your Samsung Galaxy S6 SM-G925F into the computer using the supplied USB data cable.
1. Run Smart Switch in your computer.
2. Connect the Galaxy S6 Edge into the computer using the supplied USB data cable.
3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK” button to begin updating your Galaxy S6 Edge.
So anyway, if it happens that you're from Switzerland and owns the unlocked Galaxy S6 and or the Galaxy S6 edge (SM-G925F), much better check the update right now. Below are the technical details of each update.
Samsung Galaxy S6
Model number: SM-G920F
Android version: 5.1.1
Baseband version: G920FXXU2POGQ
Kernel version: 3.10.61-5447113
Build number: LMY47X.G920FXXU2POH8
AP: G920FXXU2POH8
CP: G920FXXU2POGQ
CSC: G920FAUV2POG3
Samsung Galaxy S6 Edge
Model number: SM-G925F
Android version: 5.1.1
Baseband version: G925FXXU2POGQ
Kernel version: 3.10.61-5447113
Build number: LMY47X.G925FXXU2POH8
AP: G925FXXU2POH8
CP: G925FXXU2POGQ
CSC: G925FAUV2POG3
Update using via Over The Air (OTA)
Here’s how to do it manually:
- From your Galaxy S6 Home screen tap on Apps.
- Select the Settings gear icon.
- Tap About device.
- Tap Software update.
- Tap Check for an update.
It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Download and Install now if you do so or else Install later if you want to get the update in later time.
Update via Computer using Smart Switch
Download Smart Switch for PC
You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac. Once you installed Smart Switch, all you need is a connection between your Samsung Galaxy S6 SM-G925F into the computer using the supplied USB data cable.
1. Run Smart Switch in your computer.
2. Connect the Galaxy S6 Edge into the computer using the supplied USB data cable.
3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK” button to begin updating your Galaxy S6 Edge.

Comments
Post a Comment